2500W Induction Heater for Bolts
Lubricate frozen threads before heating. 2500W of flameless induction heat breaks stubborn rusted bonds in under 15 seconds.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
¹ Maximum output power is 2500 W. Induction heats the bolt or nut directly, so a seized fastener expands and breaks free without an open flame, which keeps nearby rubber, plastic and paint safer than a torch. Monitor the part while heating, since prolonged heat can still damage surrounding components.
² "Under a minute" and "15 to 30 seconds" reflect typical results on moderately seized steel fasteners under 20 mm in [supplier / our] testing. Heavily corroded, larger or non-ferrous fasteners may take longer.
³ Operating frequency is 45 kHz. This frequency concentrates heat in the fastener you are working on, so less heat spreads into the surrounding part.
⁴ Peak coil temperature is as stated by the manufacturer.
⁵ Input voltage is 110 V to 240 V, 50/60 Hz. It works on standard workshop outlets in most countries without an external transformer. Use a grounded outlet rated for the tool's power draw.
⁶ Continuous heating time is up to 150 seconds per cycle, with an air-cooling system as specified by the manufacturer. That is enough for most seized fasteners in one cycle. After a full cycle, let the tool cool before the next use. Do not block the air vents.
⁷ Includes four coils: a 750 mm flexible coil, a 60 mm flat coil, a 30 mm spiral coil and a 20 mm cylinder coil. Choose the coil that fits closest around the fastener for the fastest heating. The flexible coil wraps around large or awkwardly placed parts.
⁸ Cable length is 150 cm. It gives you room to reach fasteners under a vehicle or deep in an engine bay while the main unit stays in a safe, stable place.
⁹ The unit measures 26 x 19 x 8 cm and weighs 1.4 kg, so it is easy to hold, carry and store in a toolbox or on a workbench.
* 0% APR financing available through Paypal or Affirm Installments on eligible orders, subject to approval. Equal monthly payments over the promotional term.
† "Was" prices reflect the price at which this item was previously offered on this site.
Safety information. Keep the coil away from fuel lines, batteries, airbags and flammable materials. Heated parts stay hot after use; wear heat-resistant gloves and eye protection. People with pacemakers or other medical implants should not use or stand near the tool while it is operating. Read the user manual before first use.
